SP Lower Wheel Modules and Accessories
Seamtek offers the following standard accessories for the SP Technical Pattern Seam Sealer. If you don’t see what you need,
contact Seamtek as we can custom design almost anything that you need to make your production or R&D better.
Pedestal
The Pedestal is the workhorse of the three LWMs. It is excellent for several
types of welds such as overlaps, butt joints, hems of all forms, and prayer welds.
The Pedestal can be fitted with wheels ranging in width from 1/4" to 2.5".
The Pedestal as well as the rest of the LWMs has it’s own computer controlled
stepper motor to drive the weld wheels. All of the LWM stepper motors are
automatically activated when the LWM is moved into the operating position.
|
|
Side Arm
Pictured here the Side Arm is in the welding position and the Pedestal is stored.
This change over is completed in seconds. The Side Arm is primarily used for
welding tubes together end to end. For instances, welding a boot to the
leg of a pair of fishing waders. The Side Arm supports all wheel types sold by Seamtek.
|
|
Quick Arm
The Quick Arm is designed for making long continuous tubes
ranging in diameter from 2" to an unlimited diameter using an
overlap weld. It also works well for joining large panels together.
Another version of the quick arm can do butt joints. It's also great
for installing a cap in the end of a tube before it is formed,
which is good for bags.
|
|
Tape Delivery System
If your planning to seam seal sewn seams or use a butt joint of
any form, then the Tape Delivery System (TDS) is a must. The TDS is
comprised of 3 components: Spool Holder, Tensioner, and Adjustable Guide.
It can support tape width ranging from 1/4" to 2.5". An automatic tape
cutter can be added for maximum production speed.
|
|
Wheels and Nozzles
Seamtek has designed the SP to create a wide variety of seams. Therefore a wide variety of wheels and nozzles
are readily available for the SP machines. Wheels and nozzles can be changed in a matter of minutes.
Wheel sizes range in widths from 1/4" to 2.5". Wheel types include all stainless steel and silicone in 3 different
durometers. Any of these wheels can have any surface profiles milled into them such as grooves or
concave/convex contours.
|
|
Guides
The SP is also designed to attach various guides for ease of use. In some cases standard sewing
guides can be used.
|
|
Software
Due to the on board SmartSeal™ computer control, the SP can control a
variety of external systems to be synchronized with the welding process
of the SP. For instance: motorized material handling, automatic
slitters/cutting systems, printing and marking systems, data logging, etc.
|
|
